Steps for using white water tape
Then come in white water with application, put on the hose coupling, pad must be a soft layer of protection, tied with galvanized iron wire or throat hoop, and should be resistance to high pressure hose in closer from the water pump, water filling hose should prevent reverse or sudden bend, is to should be at the same time to prevent the hose coupling collision damage, then to stretch, is the need to avoid sharp objects and various oil, to the high vertical stretch, to make use of hose hook, and it is to water on the fire in winter season to be suspended, so is to prevent the water freezes, Pump to slow running, keep smaller water yield, then the whitewater with products after use, should be cleaned, in order to clear the grease on the hose, can use warm water or soap washing, is to freeze the water to make it melts, and clean air, no air hose, do winding should not be stored